Digital, 24-hour and 7-day programming , LCD Display on front face, LED indicator, 12/24 Hour Modes, Random Mode, Summer Time Function, Built in Battery. Minimum switching interval = 1 minute. Complies with BS5733, Rated at 230V AC, 13A, Max 2,990W

A compact mechanical daily timer. Can be set to operate up to 48 on/off commands per 24 hour peiod. Minimum switching period is 30 minutes. This timer has a manual over-ride switch to allow continuous or timed operation. Max resistive load is 13A.

The new version of an exclusive MistKing Seconds timer is now available. This timer has very cool improvements over the old seconds timer. It works only with MistKing Misting Systems. It can be connected to a 110V or 220V system with no problems.

Main features of MistKing Seconds Timer ST-24

• Backlit LCD Control Panel
• 10 programmable events (P0-P9)
• Ability to precisely schedule start time for each program
• Ability to precisely set misting duration for each program
• Option to schedule each program either on a specific day of the week or repeating daily
• Manual override allows for misting without affecting timer setup
• This timer has a rechargeable battery that keeps settings in case of a power failure
• Low voltage, connects to existing MistKing power supply
• Designed specifically for use with MistKing misting systems

Example:

• P0: Mist 25 sec at 8:00 am every day of the week
• P1: Mist 2 min at 4:00 pm every day of the week
• P2: Mist 4 min at 7:00 pm every Wednesday only

With this timer you now have the freedom and total control. Mist for a few seconds in the morning then for a few minutes in the afternoon and set up a schedule as you please.

If you already own a misting system and either use a hardware store digital timer or even an old version of the MistKing seconds timer, remember that upgrading is very easy and takes seconds.

MistKing Repeat Cycle Timer is an ideal choice for aeroponic and other growers that use MistKing misting systems. You can now control misting with separate repeating ON and OFF intervals for day and night. This repeat cycle timer goes beyone flexible. While many other RCT rely on a photo cell to switch from day to night mode, we use the timers internal clock to accurately specify when the switch should occur. This is much more precise. In addition you can configure exact day and night mode starts. RCT-24 can be connected to a 110V or 220V system with no problems.

Main features of MistKing RCT-24

• Backlit LCD Control Panel
• Day & Night Modes with separate configurations for ON/OFF cycles
• Ability to precisely set when day & night modes start
• Manual override allows for misting without affecting timer setup
• This timer has a rechargeable battery that keeps settings in case of a power failure
• Low voltage, connects to existing MistKing power supply
• Designed specifically for use with MistKing misting systems

Example:

If you already own a MistKing misting system and either use a hardware store digital timer or even an old version of the MistKing seconds timer, remember that upgrading is very easy and takes seconds.