A beautifully detailed polyresin gate with bamboo by Aqua Spectra.

A highly detailed and realistic polyresin rock feeder by Repstyle.

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

A beautifully detailed and realistic polyresin pipe with grass by Aqua Spectra.

A highly detailed and realistic polyresin rock feeder by Repstyle.

A highly detailed and realistic plastic plants with polyresin rock base by Repstyle. Suitable for terrarium or aquarium.

A realistic and highly detailed polyresin rock with faces by Repstyle. Suitable for terrarium or aquarium.

A beautifully detailed seashell with fish by Aqua Spectra.

A beautifully detailed and realistic polyresin ships wheel with reef and fish by Aqua Spectra.

An attractive and highly detailed plastic aquarium plant by Aqua Spectra. This plant has a realistic polyresin rock base with strong but easy release sucker(s) to support the ornament.

A detailed polyresin sunken chinook by Aqua Spectra.

A beautifully detailed polyresin driftwood stump with rocks by Repstyle.

With the Exo Terra 300W Dimming & Pulse Proportional Thermostat you can create a well-controlled heating system that allows you to maintain the required temperature conditions similar to those found in a desert or tropical environment.

The Thermostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights.

The Dimming & Pulse Proportional function keeps the temperature at the desired set-point with a much higher accuracy than conventional thermostats and virtually eliminates temperature swings in the terrarium.

The Exo Terra Thermostat should be set according to the needs of the animals. Thoroughly research the preferred optimum temperature range (POTR) for your specific reptile, so you can create the correct temperature gradients inside the terrarium to allow your reptiles to thermoregulate.

Always use a Thermometer to monitor the temperature inside your terrarium. Adjust the Exo Terra Thermostat according to the required temperature range for your pet?s environment.

Features

Red LED lights up: heating device is powered. Blue LED lights up: set temperature has been reached and heating device is no longer powered.

The recessed dial of the thermostat will prevent accidental temperature change if the device is being handled. The Thermostat comes with a power-cord with grounded plug & receptacle for increased safety and to allow the use of a power outlet strip. The waterproof remote sensor can be safely used in highly moist terrariums and aquatic environments.

Simply connect your Heat Mat, Heat Cable, Ceramic Heater or Incandescent Heat Bulb to the Exo Terra Thermostat, set the preferred temperature and place the heat sensor in the desired spot.

• Dimming & Pulse Proportional function controls terrarium temperatures very accurately
• From 18?C up to 38?C
• Red LED will indicate when heating device is ON
• Recessed dial to prevent accidental temperature change
• Waterproof remote temperature probe
• Controls heating devices up to 300W
• Choose between Pulse Proportional, Dimming or ON/OFF mode

A highly detailed and realistic polyresin driftwood stump with plastic plant by Repstyle. Suitable for terrarium or aquarium.

A beautifully detailed polyresin buddha statue by Aqua Spectra.

A highly detailed and realistic polyresin driftwood stump with plastic plant by Repstyle. Suitable for terrarium or aquarium.

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

A beautifully detailed polyresin driftwood with moss ornament by Aqua Spectra.

A highly detailed and realistic polyresin rock cavern by Repstyle. Suitable for terrarium or aquarium.

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 4 colours; Midnight Black, Leaf Green, Stone Grey and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

Reptiles are ectotherm, and use heat from an external source to thermoregulate their optimal body temperature. Most reptiles use direct radiant heat from the sun in combination with conductive heat from sun-heated surfaces such as branches, rocks or other heat accumulating structures.

Providing such an appropriate, species related, temperature gradient in the terrarium is an important factor in successful reptile keeping. With the Exo Terra Electronic ON/OFF Thermostat you can create a well controlled heating system that allows you to maintain the required temperature conditions similar to those found in a desert or tropical environment. The Thermostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights. The electronic Triac switch keeps the temperature at the desired setpoint with a much higher accuracy compared to conventional thermostats and virtually eliminates temperature swings in the terrarium. Simply connect your Heat Mat, Heat Cable or Ceramic Heater to the Exo Terra ON/OFF Thermostat, set the preferred temperature and place the heat sensor in the desired spot. The Red LED heat indicator will light up when the heating device is ON and will shut off once the desired temperature has been reached. The recessed dial of the thermostat will prevent accidental temperature change if the device is being handled. The waterproof remote sensor can be safely used in highly moist terrariums and aquatic environments.

The Exo Terra Thermostat should be set according to the needs of the animals. Thoroughly research the preferred optimum temperature range (POTR) for your specific reptile, so you can create the correct temperature gradients inside the terrarium to allow your reptiles to thermoregulate.

Reptiles are ectotherm, and use heat from an external source to thermoregulate their optimal body temperature. Most reptiles use direct radiant heat from the sun in combination with conductive heat from sun-heated surfaces such as branches, rocks or other heat accumulating structures.

Providing such an appropriate, species related, temperature gradient in the terrarium is an important factor in successful reptile keeping. With the Exo Terra Electronic ON/OFF Thermostat you can create a well controlled heating system that allows you to maintain the required temperature conditions similar to those found in a desert or tropical environment. The Thermostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights. The electronic Triac switch keeps the temperature at the desired setpoint with a much higher accuracy compared to conventional thermostats and virtually eliminates temperature swings in the terrarium. Simply connect your Heat Mat, Heat Cable or Ceramic Heater to the Exo Terra ON/OFF Thermostat, set the preferred temperature and place the heat sensor in the desired spot. The Red LED heat indicator will light up when the heating device is ON and will shut off once the desired temperature has been reached. The recessed dial of the thermostat will prevent accidental temperature change if the device is being handled. The waterproof remote sensor can be safely used in highly moist terrariums and aquatic environments.

The Exo Terra Thermostat should be set according to the needs of the animals. Thoroughly research the preferred optimum temperature range (POTR) for your specific reptile, so you can create the correct temperature gradients inside the terrarium to allow your reptiles to thermoregulate.

White Python Ultra Slim Ceramic Heater

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

Whats more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

White Python Ceramic Lamp Holder

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Heat Guard & Reflector

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.