T8 UVB Controllers

The Exo Terra Light Units are the most flexible solution for fitting all types of linear fluorescents tubes onto any type of terrarium. All units come with a double fitting to enable the combination of different Repti Glo bulbs in order to obtain the right light output depending on the species and climate. The Exo Terra Light Cycle Unit has even a timer and a linear fluorescent bulb dimmer built in.

• Fits two fluorescent bulbs
• Ideal for use with Exo Terra Repti Glo and other fluorescent bulbs
• More energy efficient than conventional ballasts or light strips
• No flickering; less stressful for reptiles and amphibians
• Water-resistant end-caps for maximum safety
• Long end-cap leads
• On/Off Switch

The Exo Terra Light Unit Electronic Terrarium Lamp Controller provides flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

The Exo Terra Light Units are the most flexible solution for fitting all types of linear fluorescents tubes onto any type of terrarium. All units come with a double fitting to enable the combination of different Repti Glo bulbs in order to obtain the right light output depending on the species and climate. The Exo Terra Light Cycle Unit has even a timer and a linear fluorescent bulb dimmer built in.

• Fits two fluorescent bulbs
• Ideal for use with Exo Terra Repti Glo and other fluorescent bulbs
• More energy efficient than conventional ballasts or light strips
• No flickering; less stressful for reptiles and amphibians
• Water-resistant end-caps for maximum safety
• Long end-cap leads
• On/Off Switch

The Exo Terra Light Unit Electronic Terrarium Lamp Controller provides flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

This convenient, practical, well-equipped starter unit includes everything you need to make your installation simple and adaptable to most applications:

• Easy-mount ballast housing
• Ample wiring to allow rear cabinet mounting
• Water resistant end caps, allowing placement of bulbs close to water surface
• On/Off switch
• Replaceable starter

The lighting system is easy to install: simply mount the ballast and bulb clip holders to a solid surface and attach the water resistant bulb end caps to the bulb and you are ready to light up your aquarium installation.

Bulb not included.

This convenient, practical, well-equipped starter unit includes everything you need to make your installation simple and adaptable to most applications:

• Easy-mount ballast housing
• Ample wiring to allow rear cabinet mounting
• Water resistant end caps, allowing placement of bulbs close to water surface
• On/Off switch
• Replaceable starter

The lighting system is easy to install: simply mount the ballast and bulb clip holders to a solid surface and attach the water resistant bulb end caps to the bulb and you are ready to light up your aquarium installation.

Bulb not included.

This convenient, practical, well-equipped starter unit includes everything you need to make your installation simple and adaptable to most applications:

• Easy-mount ballast housing
• Ample wiring to allow rear cabinet mounting
• Water resistant end caps, allowing placement of bulbs close to water surface
• On/Off switch
• Replaceable starter

The lighting system is easy to install: simply mount the ballast and bulb clip holders to a solid surface and attach the water resistant bulb end caps to the bulb and you are ready to light up your aquarium installation.

Bulb not included.

High- quality electronic ballast

• Easy to install.
• Independent power switch.
• No flickering. Effectively reduces tension and stress on reptile pets.
• Long end-cap leads.
• Ideal to use with Reptile Systems T8 tubes and other fluorescent tubes.
• For use with 14w, 15w and 18w tubes only.

High- quality electronic ballast

• Easy to install.
• Independent power switch.
• No flickering. Effectively reduces tension and stress on reptile pets.
• Long end-cap leads.
• Ideal to use with Reptile Systems T8 tubes and other fluorescent tubes.
• For use with 14w, 15w and 18w tubes only.

High- quality electronic ballast

• Easy to install.
• Independent power switch.
• No flickering. Effectively reduces tension and stress on reptile pets.
• Long end-cap leads.
• Ideal to use with Reptile Systems T8 tubes and other fluorescent tubes.
• For use with 25w and 30w tubes only.

High- quality electronic ballast

• Easy to install.
• Independent power switch.
• No flickering. Effectively reduces tension and stress on reptile pets.
• Long end-cap leads.
• Ideal to use with Reptile Systems T8 tubes and other fluorescent tubes.
• For use with 25w and 30w tubes only.

High- quality electronic ballast

• Easy to install.
• Independent power switch.
• No flickering. Effectively reduces tension and stress on reptile pets.
• Long end-cap leads.
• Ideal to use with Reptile Systems T8 tubes and other fluorescent tubes.
• For use with 36w, 38w and 40w tubes only.

High- quality electronic ballast

• Easy to install.
• Independent power switch.
• No flickering. Effectively reduces tension and stress on reptile pets.
• Long end-cap leads.
• Ideal to use with Reptile Systems T8 tubes and other fluorescent tubes.
• For use with 36w, 38w and 40w tubes only.

The Exo Terra Light Units are the most flexible solution for fitting all types of linear fluorescents tubes onto any type of terrarium. All units come with a double fitting to enable the combination of different Repti Glo bulbs in order to obtain the right light output depending on the species and climate. The Exo Terra Light Cycle Unit has even a timer and a linear fluorescent bulb dimmer built in.

• Fits two fluorescent bulbs
• Ideal for use with Exo Terra Repti Glo and other fluorescent bulbs
• More energy efficient than conventional ballasts or light strips
• No flickering; less stressful for reptiles and amphibians
• Water-resistant end-caps for maximum safety
• Long end-cap leads
• On/Off Switch

The Exo Terra Light Unit Electronic Terrarium Lamp Controller provides flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.