Ceramic heating equipment

Ceramic lamp holder

• Secure fixture for mounting vivarium lamps.
• E27 screw fitting for compatibility with most brands.
• Manual switch on lead.

The Pro Rep Ceramic Heater has been developed specifically for use with reptiles and amphibians, by providing long wave infra-red energy. Because no light is emitted the ceramic heat emitter can be used to heat an environment during the night or as additional heating during the day. Suitable for all species of reptiles or amphibians.

The Pro Rep Ceramic Heater has been developed specifically for use with reptiles and amphibians, by providing long wave infra-red energy. Because no light is emitted the ceramic heat emitter can be used to heat an environment during the night or as additional heating during the day. Suitable for all species of reptiles or amphibians.

The Pro Rep Ceramic Heater has been developed specifically for use with reptiles and amphibians, by providing long wave infra-red energy. Because no light is emitted the ceramic heat emitter can be used to heat an environment during the night or as additional heating during the day. Suitable for all species of reptiles or amphibians.

The Pro Rep Ceramic Heater has been developed specifically for use with reptiles and amphibians, by providing long wave infra-red energy. Because no light is emitted the ceramic heat emitter can be used to heat an environment during the night or as additional heating during the day. Suitable for all species of reptiles or amphibians.

The ProRep Ceramic Lamp Holder has been designed to withstand high temperatures experienced when using ceramic heaters and heat lamps. Manufactured to EU safety standards and fitted with a 2 metre high temperature rated silicone cable the Pro Rep Ceramic Lamp Holder is compatible with all lamps and heaters with an E27 lamp fitting rated up to 300w.

The ProRep Ceramic Lamp Holder has been designed to withstand high temperatures experienced when using ceramic heaters and heat lamps. Included is a fixing bracket and screws for securing the holder to the ceiling of a vivarium. Manufactured to EU safety standards and fitted with a 2 metre high temperature rated silicone cable the Pro Rep Ceramic Lamp Holder is compatible with all lamps and heaters with an E27 lamp fitting rated up to 300w.

• Ideal for creating necessary warm areas in the terrarium.
• Supports digestion, promotes well-being and activity.
• Suitable as a constant heat source in terrariums.
• Enables night observation of the animals without disrupting the 24 hour cycle.
• Ideal in combination with a suitable thermostat in order to regulate the heat.
• Only use emitter in the ceramic bulb holder.

• Ideal for creating necessary warm areas in the terrarium.
• Supports digestion, promotes well-being and activity.
• Suitable as a constant heat source in terrariums.
• Enables night observation of the animals without disrupting the 24 hour cycle.
• Ideal in combination with a suitable thermostat in order to regulate the heat.
• Only use emitter in the ceramic bulb holder.

• Ideal for creating necessary warm areas in the terrarium.
• Supports digestion, promotes well-being and activity.
• Suitable as a constant heat source in terrariums.
• Enables night observation of the animals without disrupting the 24 hour cycle.
• Ideal in combination with a suitable thermostat in order to regulate the heat.
• Only use emitter in the ceramic bulb holder.

Reptile Systems Ceramic Lamp Holder features a unique 180 degree rotating bracket to provide a secure but versatile fixture for mounting vivarium lamps.

• Rated for up to 200 Watts
• E27 screw fitting for compatibility with most brands.
• Can be mounted horizontally or vertically.
• Use horizontally with 3U compacts to maximise UVB from body of the lamp.
• Use vertically with spiral compacts to maximise UVB from head of the lamp.
• Can be paired with Reptile Systems Clamp Lamps for multiple lighting options.
• Highly versatile mounting options (Screws not included).
• On/Off in line switch.

Zoo Med's Ceramic Heat Emitter is now available in NANO size! Ceramic Heat Emitters are the perfect 24 hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense 'muscle-penetrating' infrared heat.

• Emits No Light! 24-hour heat source for nano-sized terrariums.
• Long life! Lasts up to 5 years.
• Ideal for small geckos, hatchling reptiles, amphibians, or invertebrates (arachnids or tarantulas).

Zoo Med's Ceramic Heat Emitter is now available in NANO size! Ceramic Heat Emitters are the perfect 24 hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense 'muscle-penetrating' infrared heat.

• Emits No Light! 24-hour heat source for nano-sized terrariums.
• Long life! Lasts up to 5 years.
• Ideal for small geckos, hatchling reptiles, amphibians, or invertebrates (arachnids or tarantulas).

The Exo Terra Ceramic Heater is a radiant heat source which creates a natural sunlike heat with a uniform pattern. The long wave infrared heat produced by this emitter will warm reptiles very efficiently. It also increases the ambient airtemperature in the terrarium. Infrared heat penetrates the scales and skin tissue, promoting health and healing as it widens the blood vessels and increases blood circulation.

Ceramic heat emitters emit invisible infrared radiation which warm animals and objects. This heat radiation allows to create warm spots where the animals can bask. Thanks to the invisible radiation ceramic heat emitters can be used 24 hours a day. Their long life makes them an economic heating solution.

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

What?s more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

What?s more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

What?s more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Ultra Slim Ceramic Heater

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

Whats more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

White Python Ceramic Lamp Holder

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Heat Guard & Reflector

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

White Python Ultra Slim Ceramic Heater

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

Whats more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

White Python Ceramic Lamp Holder

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Heat Guard & Reflector

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

White Python Ultra Slim Ceramic Heater

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

Whats more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

White Python Ceramic Lamp Holder

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Heat Guard & Reflector

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

White Python Ultra Slim Ceramic Heater

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

Whats more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

White Python Ceramic Lamp Holder

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Heat Guard & Reflector

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.

White Python Ultra Slim Ceramic Heater

The WhitePython Ultra Slim Heat Lamps bring a simple yet professional approach to reptile keeping. Each lamp offers the same level of heat as competing ceramic bulbs but are less than half the height.

This shortened heat lamp offers more space for your reptile to climb and bask under the heat whilst also offering a more aesthetically pleasing terrarium with greater viewing area.

The Ultra Slim Heat Lamps provide a radiant heat source without emitting any light; making them suitable for both day and night use. The infra-red method of heating allows for a basking area directly under the heater, whilst also increasing the ambient temperature of the terrarium.

Whats more; as the Ultra Slim Heat Lamps use less raw materials, they are more ecologically friendly than competing brands and are able to be produced for less cost.

White Python Ceramic Lamp Holder

Designed for use with the WhitePython Ultra Slim Heat Lamps, the Ceramic Lamp Holder is capable of working with all E27 Screw fitting bulbs up to 300Watts.

White Python Heat Guard & Reflector

The WhitePython Ceramic Heat Guard & Reflector is an entirely unique product which exclusively fits the WhitePython Ultra Slim Heat Lamps.

Compared to regular ceramic heat guards which often measure over 25cm tall, the new combination of WhitePython products will reduce the overall height of your ceramic heating unit to just 16cm, with a diameter of 14cm.

What's more, with a built in custom reflector dome your heater will become more energy efficient, reducing the necessary output to achieve the required temperature whilst also reducing the heat that rises into the roof of the terrarium, thereby reducing the possible risk of fire hazards.

The Ceramic Heat Guard & Reflectors are available in 3 colours; Midnight Black, Leaf Green and Earth Brown. They feature an outer guard to protect your reptile against possible burns, an inner reflective dome to push heat downwards and finally, a removable mesh grille on the base for easy access to the ceramic heater.

Installation of this innovative heat guard is also made easy with the twist lock screw fittings. Unlike traditional heat guards where you need to struggle holding the unit in the terrarium whilst single handedly trying to screw through a small hole into the terrarium room, WhitePython has made this easy. Simply mark the screw holes into the terrarium roof, put the screws in, leaving just a small gap, then once your heat guard is ready to install, simply place over the screws, twist and then tighten. Easy.