Heat mats and strips

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra-long wavelength infra-red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The Sticky Back models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra-long wavelength infra-red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The Sticky Back models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra-long wavelength infra-red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The Sticky Back models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra-long wavelength infra-red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The Sticky Back models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild. This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently. Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The High Out Put models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat. These heat mats produce a much higher temperature than standard heat mat models, they MUST be used with a thermostat and they MUST not be covered.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The High Out Put models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat. These heat mats produce a much higher temperature than standard heat mat models, they MUST be used with a thermostat and they MUST not be covered.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The High Out Put models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat. These heat mats produce a much higher temperature than standard heat mat models, they MUST be used with a thermostat and they MUST not be covered.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The High Out Put models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat. These heat mats produce a much higher temperature than standard heat mat models, they MUST be used with a thermostat and they MUST not be covered.

ProRep Heat Mats and Heat Strips are designed for use with reptiles, amphibians and invertebrates. They work by producing ultra long wavelength infra red heat that is absorbed by the animal and cage furnishings in much the same way as the sun warms basking animals or the ground in the wild.

This action allows the animals to warm themselves without necessarily raising the air temperature in the vivarium or tank. The choice of heat mat size and installation method will depend very much on the requirements of the species and the design and size of the set up and supplementary heating may be required for species that require a more intense heat or localised basking spots to raise their body temperature sufficiently.

Care must be taken to comply with the safety and installation instructions and the use of a thermostat is essential. ProRep Heat Mats and Strips are available only in cloth heating element materials - and in a range of sizes to suit most heating requirements and are manufactured in the UK to the highest safety standards.

The High Out Put models are design to be fixed to the wall or ceiling of an enclosure through the use of the special adhesive which is applied to the heat mat. These heat mats produce a much higher temperature than standard heat mat models, they MUST be used with a thermostat and they MUST not be covered.

The unique distribution of the heating ink on the sides of the Heat Mat allows for a gradual decrease of the temperature towards the heat mat edge which reduces the risk of glass bottom cracking. The uniformity of temperature is guaranteed because of the wide heating bands. Reptile Systems Heat Mat, unlike other heat systems allows the creation of a cooler area for your animals because it is installed on a side or under the enclosure.

Easy to install (refer to instructions on the side panel), is ultra flat and thin and is placed under tank. This allows the user to keep all electrical parts out of the tank, with the maximum safety for your animals.

Safe and reliable also for the user because there are no electrical wires within the heating pad.
15 x 15cm Dimensions / 3.5 Watts

The unique distribution of the heating ink on the sides of the Heat Mat allows for a gradual decrease of the temperature towards the heat mat edge which reduces the risk of glass bottom cracking. The uniformity of temperature is guaranteed because of the wide heating bands. Reptile Systems Heat Mat, unlike other heat systems allows the creation of a cooler area for your animals because it is installed on a side or under the enclosure.

Easy to install (refer to instructions on the side panel), is ultra flat and thin and is placed under tank. This allows the user to keep all electrical parts out of the tank, with the maximum safety for your animals.>/p>

Safe and reliable also for the user because there are no electrical wires within the heating pad.
28 x 16.5cm Dimensions / 8 Watts

The unique distribution of the heating ink on the sides of the Heat Mat allows for a gradual decrease of the temperature towards the heat mat edge which reduces the risk of glass bottom cracking. The uniformity of temperature is guaranteed because of the wide heating bands. Reptile Systems Heat Mat, unlike other heat systems allows the creation of a cooler area for your animals because it is installed on a side or under the enclosure.

Easy to install (refer to instructions on the side panel), is ultra flat and thin and is placed under tank. This allows the user to keep all electrical parts out of the tank, with the maximum safety for your animals.

Safe and reliable also for the user because there are no electrical wires within the heating pad.
28 x 28cm Dimensions / 16 Watts

The unique distribution of the heating ink on the sides of the Heat Mat allows for a gradual decrease of the temperature towards the heat mat edge which reduces the risk of glass bottom cracking. The uniformity of temperature is guaranteed because of the wide heating bands. Reptile Systems Heat Mat, unlike other heat systems allows the creation of a cooler area for your animals because it is installed on a side or under the enclosure.

Easy to install (refer to instructions on the side panel), is ultra flat and thin and is placed under tank. This allows the user to keep all electrical parts out of the tank, with the maximum safety for your animals.

Safe and reliable also for the user because there are no electrical wires within the heating pad.
28 x 41cm Dimensions / 24 Watts

The unique distribution of the heating ink on the sides of the Heat Mat allows for a gradual decrease of the temperature towards the heat mat edge which reduces the risk of glass bottom cracking. The uniformity of temperature is guaranteed because of the wide heating bands. Reptile Systems Heat Mat, unlike other heat systems allows the creation of a cooler area for your animals because it is installed on a side or under the enclosure.

Easy to install (refer to instructions on the side panel), is ultra flat and thin and is placed under tank. This allows the user to keep all electrical parts out of the tank, with the maximum safety for your animals.

Safe and reliable also for the user because there are no electrical wires within the heating pad.
28 x 65cm Dimensions / 38 Watts

The CreatureTherm is an easy to set up glass terrarium heater for Arachnids, Insects, and more. Helps maintain proper temperatures to keep your pets healthy. Always follow the included instructions when using an electrical device.

• 4 watt energy-efficient heater.
• Designed for use with glass terrariums.
• Helps maintain proper temperatures.
• Complete instructions enclosed.

The Vivexotic Heat Mat Holder, ensure heating melamine vivarium's has never been safer and more convenient.

Specifically designed to enable heat mats to be used safely in wooden vivariums.

It incorporates a layer of glass so that air can circulate across the surface of the mat to reduce the risk of overheating and thermal blocking.

Benefits include: Creates even heat distribution, Eliminates hot spots, Protects heat mat from animal and water damage, Sturdy construction with BS safety glass.

Approximate Dimensions (Product): 30 x 30 x 2cm

The unique distribution of the heating ink on the sides of the Heat Mat allows for a gradual decrease of the temperature towards the heat mat edge which reduces the risk of glass bottom cracking. The uniformity of temperature is guaranteed because of the wide heating bands. Reptile Systems Heat Mat, unlike other heat systems allows the creation of a cooler area for your animals because it is installed on a side or under the enclosure.

Easy to install (refer to instructions on the side panel), is ultra flat and thin and is placed under tank. This allows the user to keep all electrical parts out of the tank, with the maximum safety for your animals.

Safe and reliable also for the user because there are no electrical wires within the heating pad.
110 x 15cm Dimensions / 32 Watts