MistKing Advanced Misting System v5.0

This product is covered by our Safe Delivery Guarantee

RRP £624.99 Save £6.20
RRP €715.49 Save €7.10
RRP $884.36 Save $8.77
RRP $1,145.42 Save $11.36
RRP DKK5,329.29 Save DKK52.87
RRP NOK6,851.27 Save NOK67.97
RRP SEK7,294.57 Save SEK72.36
RRP $1,138.36 Save $11.29
You save £6.20
You save €7.10
You save $8.77
You save $11.36
You save DKK52.87
You save NOK67.97
You save SEK72.36
You save $11.29

MistKing Advanced Misting System v5.0

Product Code: CMK015

MistKing Advanced Misting System v5.0

More product images

MistKing Advanced Misting System v5.0

Printer Friendly

Download the Buying Guide

Download the Technical Guide


Advanced Misting System with a 3/8" Backbone is a significantly more powerful system than the starter or ultimate. Unless you're going to exceed 20 nozzles, we do not recommend upgrading to this misting system. Features a pump capable of pressures up to 125psi. Supports from 10 to 70+ nozzles of your choice. Actual number of nozzles depends on the complexity of the system. Pump can run continuously for hours at a time, EVEN DRY! These pumps are manufactured specifically for MistKing and are very robust.

This is the 4th generation mistking system which includes the new seconds timer. If your need calls for a different timer, be sure to select it from the options on the right.

This Advanced Misting System v5.0 includes

  • Large capacity diaphragm pump with 3/8" fittings
  • 24V Power adapter - 110V (CE and cUL listed)
  • 3/8" reservoir bulkhead with plug
  • 3/8" Ball Valve
  • 35 feet of 1/4" black opaque tubing (to connect nozzles)
  • 15 feet of 3/8" black opaque tubing (to connect reservoir to pump and run nozzle 3/8" backbone)
  • 12 Value "T" Misting Assemblies
  • 3 Value "L" Misting Assemblies
  • 2 Reducing Tee Connections (3/8" to 1/4")
  • 1 Reducing Elbow Connections (3/8" to 1/4")
  • 20 1/4" Tubing Clips
  • 10 3/8" Tubing Clips
  • Seconds timer ST-24
  • Installation instructions

This kit can be used as is, just get a suitable size reservoir. If you intend to use more nozzles, we recommend extending the 3/8" tubing backbone and adding some extra Reducing Tee (link) connections and then splitting into 1/4" lines that will feed the individual misting assemblies. Alternatively you can use a 7 port manifold fed by 3/8" tubing or a combination of both.

We suggest using this kit as the backbone for a custom misting system. Just add parts, nozzles, tubing and expand on this work horse. If you need help designing a system that will fit your particular situation, please contact us. Hobbyists and ZOOs run their entire animal rooms based on this kit or multiple kit.