A great range of bulb holders

The Exo Terra Terrarium Fixture adds a whole new level to terrarium lighting fixtures. The Exo Terra Terrarium Fixture directs the light and heat downwards to create the perfect basking spot for your reptiles. The adjustable bracket allows you to swivel the fixture from left to right to direct the heat radiation to the preferred basking area in your terrarium. The fixture can be moved up or down to adjust the distance between the basking spot bulb and your pet reptile in order to regulate the temperature of the basking area. Stylish design, safety and ease of use were emphasized during the creation of this state-of-the-art fixture. Simply stick the self-adhesive support-bracket to the terrarium glass and the fixture is ready-for-use.

With its modern looks, the Exo Terra Terrarium Fixture integrates easily into any living room.

The Exo Terra Light Bracket is designed to suspend the Exo Terra Light Dome or other types domes or wire fixtures above any Exo Terra Natural Terrarium or other glass terrarium securely. The Exo Terra Light Bracket easily adjusts to fit most types of fixtures or can be used to regulate heat/light according to required terrarium conditions by moving the rubber washers. Since the bulbs do not need to be moved after installation, together with increased ventilation, the light bulbs' (basking lamps, Solar Glo, etc.) life span is drastically improved.

Replacement part for the Exo Terra Light Bracket. The Exo Terra Light Bracket Adhesive Support Base is a replacement part for the Exo Terra Light Bracket. When attached to the terrarium, it serves as a supportive base for the bracket. Please follow the installation instructions thoroughly to ensure optimal safety and working.

Clamp for use with Thermo Socket + Reflector so it can be used as a Clamp Lamp

The Lucky Reptile 2 in 1 Lamp Support stand has been designed as a secure mounting for of lamps and heaters when used in suspension type holders/reflectors. They are ideal for use in either open top enclosures, such as tortoise tables or larger enclosures where they can be free-standing. These lamp stands are fully adjustable both vertically (60-95cm) and horizontally (20-38cm) to allow maximum flexibility in many different use situations. Available in either black or white powder coated steel finish.

The Lucky Reptile Thermo Socket Cap consists of flexible black silicone and is simply pulled over the porcelain socket. It is not necessary to take apart the lamp to install the Thermo Socket Cap. The cap recommend when using high wattage lamps at it will insulate the hot lampholder. Also it will improve the optical appearance of most luminaires. The Thermo Socket Cap is suitable for all Thermo Socket plus Reflector with external lampholder as well as the Thermo Socket /PRO models.

With in-line connector for easy installation. These sets contain a E27 porcelain lampholder, a high quality steel reflector, wire mesh protector, power lead and all necessary mounting accessories. The steel reflector focuses the light and acts as sight protection, preventing being blinded by the light. The wire mesh protector is placed on the bottom of the reflector and prevents the animals getting in contact with the bulb. Mounting accessories for installation inside the terrarium are included. A clamp for using the set as clamp lamp is available separately. Suitable for light bulbs up to 150W. Two varieties are available with different reflector sizes: Thermo Socket plus Reflector large: for energy saving bulbs and UV lamps

Mini version of the popular Thermo Socket plus Reflector range for use with Moon Lamp, Halogen Sun Mini and Amphib Sun Mini. Complete with removable mesh guard, in-line switch and heat resistant ceramic holder. For use with lamps up to 60W.

With in-line connector for easy installation. These sets contain a E27 porcelain lampholder, a high quality steel reflector, wire mesh protector, power lead and all necessary mounting accessories. The steel reflector focuses the light and acts as sight protection, preventing being blinded by the light. The wire mesh protector is placed on the bottom of the reflector and prevents the animals getting in contact with the bulb. Mounting accessories for installation inside the terrarium are included. A clamp for using the set as clamp lamp is available separately. Suitable for light bulbs up to 150W. Two varieties are available with different reflector sizes: Thermo Socket plus Reflector large: for energy saving bulbs and UV lamps

These sets contain a E27 porcelain lampholder, a high quality steel reflector, wire mesh protector, power lead and all necessary mounting accessories. The steel reflector focuses the light and acts as sight protection, preventing being blinded by the light. The wire mesh protector is placed on the bottom of the reflector and prevents the animals getting in contact with the bulb. Mounting accessories for installation inside the terrarium are included. A clamp for using the set as clamp lamp is available separately. Suitable for light bulbs up to 150W. Two varieties are available with different reflector sizes: Thermo Socket plus Reflector small: for bulbs up to 75W and all Halogen Sun spot lamps.

Pendant fitting for use with bayonet spotlamps. Plugged and supplied with 2 metres of lead. Maximum rating 100 watts.

Plastic Bayonet to Screw Converter (BC to ES, for ES Bulbs). Now you can enjoy the freedom of using screw bulbs in your bayonet light fittings. Tough plastic adapters - fully insulated and conforming to BS safety standards. Quick to change. Easy to use.

Plastic Screw to Bayonet Converter (ES to BC, for BC Bulbs). Now you can enjoy the freedom of using bayonet bulbs in your screw light fittings. Tough plastic adapters - fully insulated and conforming to BS safety standards. Quick to change. Easy to use.

Pendant fitting for use with ES screw fit spotlamps. Plugged and supplied with 2 metres of lead. Maximum rating 100 watts.

The Pro Rep Universal Lamp Holder Mounting Bracket is a high quality, powder coated bracket which is suitable for use with any Lamp Holder.

Dual fixture allows for multiple lamp combinations including UVB lamps, daytime heat lamps and nighttime heat lamps.

Dual ceramic sockets for use with lamps up to 160 watts (combined wattage is 300 watts max.).

Polished aluminum dome for maximum light & heat output.

Deep Dome extends beyond the face of the lamp preventing the lamp from 'sticking out'.

The Creatures Dome Lamp Fixture is the perfect bug-sized lamp for a variety of Arachnid, Insect, and other Invertebrate species? habitats. Works with the Creatures LED and Creatures LED Black Light.

Maximum wattage - 40 watts

The Deep Dome Lamp Fixture features an extra long reflector dome that extends beyond the face of the lamp, preventing the lamp from sticking out. It is perfect for use with Zoo Meds PowerSun UV lamps and ReptiSun UVB Compact Fluorescent lamps. The highly polished aluminum inside the dome greatly increases UVB and UVA output.

Zoo Meds most popular Clamp Lamp fixture is available in three sizes: 14cm, 22cm, or 25cm diameter domes.

Made of heavy gauge painted aluminum. All three models have a ceramic socket, and can be used with the Clamp Lamp Safety Cover to protect your bulbs, animals, and home.

Zoo Meds most popular Clamp Lamp fixture is available in three sizes: 14cm, 22cm, or 25cm diameter domes.

Made of heavy gauge painted aluminum. All three models have a ceramic socket, and can be used with the Clamp Lamp Safety Cover to protect your bulbs, animals, and home.

This ceramic base Clamp Lamp fixture is ideal for use with all types of incandescent lamps or Ceramic Heat Emitters. This Clamp Lamp fixture has a heat-resistant porcelain socket that handles up to 250 watts. The wire guard is safer than an aluminum refle

Use a Reptile Lamp Stand to safely suspend any of Zoo Meds Clamp Lamp fixtures or Drippers above your enclosure. The Reptile Lamp Stand is available in two sizes, both with adjustable height and length as well as power cord clips and a large base for stability.

The smaller size fits terrariums up to 20 gallons in size and has a maximum height adjustment of 61 cm and a maximum length adjustment of 30 cm.

Use a Reptile Lamp Stand to safely suspend any of Zoo Meds Clamp Lamp fixtures or Drippers above your enclosure. The Reptile Lamp Stand is available in two sizes, both with adjustable height and length as well as power cord clips and a large base for stability.

The larger stand easily adjusts from 20-38 cm long and 50-97 cm high to fit most standard size terrariums.