Electrical timers

As a digital timer with 8 program slots, operating times for lighting, heating technology or even humidification and dehumidification technology can be programmed to the second. There are numerous options for assigning these operating times to individual days, groups of days or the entire week. For example, heat lamps can be operated for different lengths of time over the course of the week in order to imitate temperature fluctuations as in nature.

This high degree of flexibility is surpassed again by using the interval function.

Instead of on and off times, which are limited in number, the Lucky Reptile PRO Timer II defines periods in which operating and break times are set completely flexibly.

The device to be controlled now runs automatically at intervals in the defined period, e.g. with an operating time of 10 seconds every 60 minutes. The number of possible circuits is therefore almost limitless.

This is particularly interesting for irrigation technology. Irrigation times can thus be designed not only extremely numerous but also very varied in the course of a day, as well as in the course of a week. E.g. frequent short rain showers in the morning, a dry phase at midday and a long shower in the evening on freely selectable days; the irrigation times on other days can be defined differently, or omitted completely. The Pro Timer II covers all the requirements of a timer and also offers great opportunities to make the terrarium climate more varied and more natural.

A replaceable battery ensures that the programmed switching times are reliably stored. The switching power of the Lucky Reptile PRO Timer II is 3500W. Shortest switching time: one second.

Digital, 24-hour and 7-day programming , LCD Display on front face, LED indicator, 12/24 Hour Modes, Random Mode, Summer Time Function, Built in Battery. Minimum switching interval = 1 minute. Complies with BS5733, Rated at 230V AC, 13A, Max 2,990W

A compact mechanical daily timer. Can be set to operate up to 48 on/off commands per 24 hour peiod. Minimum switching period is 30 minutes. This timer has a manual over-ride switch to allow continuous or timed operation. Max resistive load is 13A.

The new version of an exclusive MistKing Seconds timer is now available. This timer has very cool improvements over the old seconds timer. It works only with MistKing Misting Systems. It can be connected to a 110V or 220V system with no problems.

Main features of MistKing Seconds Timer ST-24

• Backlit LCD Control Panel
• 10 programmable events (P0-P9)
• Ability to precisely schedule start time for each program
• Ability to precisely set misting duration for each program
• Option to schedule each program either on a specific day of the week or repeating daily
• Manual override allows for misting without affecting timer setup
• This timer has a rechargeable battery that keeps settings in case of a power failure
• Low voltage, connects to existing MistKing power supply
• Designed specifically for use with MistKing misting systems

Example:

• P0: Mist 25 sec at 8:00 am every day of the week
• P1: Mist 2 min at 4:00 pm every day of the week
• P2: Mist 4 min at 7:00 pm every Wednesday only

With this timer you now have the freedom and total control. Mist for a few seconds in the morning then for a few minutes in the afternoon and set up a schedule as you please.

If you already own a misting system and either use a hardware store digital timer or even an old version of the MistKing seconds timer, remember that upgrading is very easy and takes seconds.

MistKing Repeat Cycle Timer is an ideal choice for aeroponic and other growers that use MistKing misting systems. You can now control misting with separate repeating ON and OFF intervals for day and night. This repeat cycle timer goes beyone flexible. While many other RCT rely on a photo cell to switch from day to night mode, we use the timers internal clock to accurately specify when the switch should occur. This is much more precise. In addition you can configure exact day and night mode starts. RCT-24 can be connected to a 110V or 220V system with no problems.

Main features of MistKing RCT-24

• Backlit LCD Control Panel
• Day & Night Modes with separate configurations for ON/OFF cycles
• Ability to precisely set when day & night modes start
• Manual override allows for misting without affecting timer setup
• This timer has a rechargeable battery that keeps settings in case of a power failure
• Low voltage, connects to existing MistKing power supply
• Designed specifically for use with MistKing misting systems

Example:

If you already own a MistKing misting system and either use a hardware store digital timer or even an old version of the MistKing seconds timer, remember that upgrading is very easy and takes seconds.