T8 UVB Controllers

The Exo Terra Light Units are the most flexible solution for fitting all types of linear fluorescents tubes onto any type of terrarium. All units come with a double fitting to enable the combination of different Repti Glo bulbs in order to obtain the right light output depending on the species and climate. The Exo Terra Light Cycle Unit has even a timer and a linear fluorescent bulb dimmer built in.

• Fits two fluorescent bulbs
• Ideal for use with Exo Terra Repti Glo and other fluorescent bulbs
• More energy efficient than conventional ballasts or light strips
• No flickering; less stressful for reptiles and amphibians
• Water-resistant end-caps for maximum safety
• Long end-cap leads
• On/Off Switch

The Exo Terra Light Unit Electronic Terrarium Lamp Controller provides flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

The Exo Terra Light Units are the most flexible solution for fitting all types of linear fluorescents tubes onto any type of terrarium. All units come with a double fitting to enable the combination of different Repti Glo bulbs in order to obtain the right light output depending on the species and climate. The Exo Terra Light Cycle Unit has even a timer and a linear fluorescent bulb dimmer built in.

• Fits two fluorescent bulbs
• Ideal for use with Exo Terra Repti Glo and other fluorescent bulbs
• More energy efficient than conventional ballasts or light strips
• No flickering; less stressful for reptiles and amphibians
• Water-resistant end-caps for maximum safety
• Long end-cap leads
• On/Off Switch

The Exo Terra Light Unit Electronic Terrarium Lamp Controller provides flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

The Exo Terra Light Units are the most flexible solution for fitting all types of linear fluorescents tubes onto any type of terrarium. All units come with a double fitting to enable the combination of different Repti Glo bulbs in order to obtain the right light output depending on the species and climate. The Exo Terra Light Cycle Unit has even a timer and a linear fluorescent bulb dimmer built in.

• Fits two fluorescent bulbs
• Ideal for use with Exo Terra Repti Glo and other fluorescent bulbs
• More energy efficient than conventional ballasts or light strips
• No flickering; less stressful for reptiles and amphibians
• Water-resistant end-caps for maximum safety
• Long end-cap leads
• On/Off Switch

The Exo Terra Light Unit Electronic Terrarium Lamp Controller provides flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

This convenient, practical, well-equipped starter unit includes everything you need to make your installation simple and adaptable to most applications:

• Easy-mount ballast housing
• Ample wiring to allow rear cabinet mounting
• Water resistant end caps, allowing placement of bulbs close to water surface
• On/Off switch
• Replaceable starter

The lighting system is easy to install: simply mount the ballast and bulb clip holders to a solid surface and attach the water resistant bulb end caps to the bulb and you are ready to light up your aquarium installation.

Bulb not included.

A simple IP64 (splash proof) fluorescent lighting controller, designed to easily add fluorescent lighting to dry vivariums

Note: Due to the IP64 rating, the product is only designed for dry vivaria, and is not suitable for vivariums incorporating misters, rain systems or standing water, for these installations the Ultra Seal Vivarium Controller MUST be used.

A simple IP64 (splash proof) fluorescent lighting controller, designed to easily add fluorescent lighting to dry vivariums

Note: Due to the IP64 rating, the product is only designed for dry vivaria, and is not suitable for vivariums incorporating misters, rain systems or standing water, for these installations the Ultra Seal Vivarium Controller MUST be used.

A simple IP64 (splash proof) fluorescent lighting controller, designed to easily add fluorescent lighting to dry vivariums

Note: Due to the IP64 rating, the product is only designed for dry vivaria, and is not suitable for vivariums incorporating misters, rain systems or standing water, for these installations the Ultra Seal Vivarium Controller MUST be used.

A simple IP64 (splash proof) fluorescent lighting controller, designed to easily add fluorescent lighting to dry vivariums

Note: Due to the IP64 rating, the product is only designed for dry vivaria, and is not suitable for vivariums incorporating misters, rain systems or standing water, for these installations the Ultra Seal Vivarium Controller MUST be used.

The Arcadia UltraSeal Vivarium range of fluorescent controllers with plug and socket fittings can be used for both reptile and aquarium purposes.

Mini plug and socket connector on lamp holder leads, allows the lamp holders to be detached from main unit. Leads can be fed through fine mesh or grill before being re attached. Lampholder can be siliconed or attached inside the vivarium.

The Arcadia UltraSeal Vivarium range of fluorescent controllers with plug and socket fittings can be used for both reptile and aquarium purposes.

Mini plug and socket connector on lamp holder leads, allows the lamp holders to be detached from main unit. Leads can be fed through fine mesh or grill before being re attached. Lampholder can be siliconed or attached inside the vivarium.

The Arcadia UltraSeal Vivarium range of fluorescent controllers with plug and socket fittings can be used for both reptile and aquarium purposes.

Mini plug and socket connector on lamp holder leads, allows the lamp holders to be detached from main unit. Leads can be fed through fine mesh or grill before being re attached. Lampholder can be siliconed or attached inside the vivarium.

The Arcadia UltraSeal Vivarium range of fluorescent controllers with plug and socket fittings can be used for both reptile and aquarium purposes.

Mini plug and socket connector on lamp holder leads, allows the lamp holders to be detached from main unit. Leads can be fed through fine mesh or grill before being re attached. Lampholder can be siliconed or attached inside the vivarium.

The Arcadia ULTRA SEAL controllers are the latest generation of Arcadia's popular fluorescent lighting controllers.

They incorporate a number of improvements and are designed to comply with the latest European aquarium lighting standards.

• Patented ULTRA SEAL waterproof (IP67) lamp-holders
• Supplied with universal mounting brackets for installation on aquarium hood or walls
• Compatible with Arcadia reflector range
• 5 Year Guarantee

The Arcadia ULTRA SEAL controllers are the latest generation of Arcadia's popular fluorescent lighting controllers.

They incorporate a number of improvements and are designed to comply with the latest European aquarium lighting standards.

• Patented ULTRA SEAL waterproof (IP67) lamp-holders
• Supplied with universal mounting brackets for installation on aquarium hood or walls
• Compatible with Arcadia reflector range
• 5 Year Guarantee

The Arcadia ULTRA SEAL controllers are the latest generation of Arcadia's popular fluorescent lighting controllers.

They incorporate a number of improvements and are designed to comply with the latest European aquarium lighting standards.

• Patented ULTRA SEAL waterproof (IP67) lamp-holders
• Supplied with universal mounting brackets for installation on aquarium hood or walls
• Compatible with Arcadia reflector range
• 5 Year Guarantee

The Arcadia ULTRA SEAL controllers are the latest generation of Arcadia's popular fluorescent lighting controllers.

They incorporate a number of improvements and are designed to comply with the latest European aquarium lighting standards.

• Patented ULTRA SEAL waterproof (IP67) lamp-holders
• Supplied with universal mounting brackets for installation on aquarium hood or walls
• Compatible with Arcadia reflector range
• 5 Year Guarantee

The Arcadia ULTRA SEAL controllers are the latest generation of Arcadia's popular fluorescent lighting controllers.

They incorporate a number of improvements and are designed to comply with the latest European aquarium lighting standards.

• Patented ULTRA SEAL waterproof (IP67) lamp-holders
• Supplied with universal mounting brackets for installation on aquarium hood or walls
• Compatible with Arcadia reflector range
• 5 Year Guarantee

This convenient, practical, well-equipped starter unit includes everything you need to make your installation simple and adaptable to most applications:

• Easy-mount ballast housing
• Ample wiring to allow rear cabinet mounting
• Water resistant end caps, allowing placement of bulbs close to water surface
• On/Off switch
• Replaceable starter

The lighting system is easy to install: simply mount the ballast and bulb clip holders to a solid surface and attach the water resistant bulb end caps to the bulb and you are ready to light up your aquarium installation.

Bulb not included.

This convenient, practical, well-equipped starter unit includes everything you need to make your installation simple and adaptable to most applications:

• Easy-mount ballast housing
• Ample wiring to allow rear cabinet mounting
• Water resistant end caps, allowing placement of bulbs close to water surface
• On/Off switch
• Replaceable starter

The lighting system is easy to install: simply mount the ballast and bulb clip holders to a solid surface and attach the water resistant bulb end caps to the bulb and you are ready to light up your aquarium installation.

Bulb not included.